Two component car lamp adhesive
This JS-8100 two-component special car lamp adhesive is a two-component, neutral, and fast curing silicone sealant.
Product features
1. Toughened elastomer after curing;
2. Stable performance within the range of -55 ℃ to 180 ℃;
3. Without the use of primer, it can bond most materials such as metal, plastic, ceramics, and glass;
4. Convenient construction, suitable for assembly line production;
5. The recommended usage ratio is 8 to 10:1 (weight ratio)
|
Before curing |
Sample standard（Volume ratio 8:1） |
|
Appearance |
Paste |
|
Sagmm |
≤3 |
|
Tack-Free Time min（23℃）/min |
≤120 |
|
After curing（7天，23±2℃；50±5%RH） |
|
|
Appearance |
Elastic rubber |
|
Hardness Shore A |
≥30 |
|
Tensile strength Mpa |
≥1.2 |
|
Elongation at Break% |
≥150 |
- Anticipated matters:
- Please read the safety manual before use to learn about preventive measures and safety recommendations. For chemicals that do not require labeling, observe in advance and take corresponding preventive measures.
- Action:
- The construction site should have a good ventilation system.
- Surface treatment: The substrate surface needs to be dry and clean to remove stress, static electricity, dust, oil stains, etc.
- Bonding: Squeeze the gel onto the cleaned surface with a glue gun to distribute it evenly. If the temperature is low, the curing time will be extended.
- After applying the adhesive, please immediately assemble the components together so that the adhesive can achieve good wetting effect, which will help with the bonding effect.
- If the assembled components are stored in a dry environment (with a relative humidity of less than 50%), it is recommended to increase the humidity to ensure a suitable curing and crosslinking speed.
- Cleaning:
- After a certain period of curing, alcohol or acetone can be used to clean excess adhesive in a timely manner. The fully cured adhesive is difficult to remove and may require long-term immersion in an alcohol solvent to remove.
- matters needing attention:
- --Ready to use and do not expose to air for extended periods of time.
- --Maintain first in, first out use of materials.
- --Use in a well ventilated area.
- --Do not eat in the workplace.
Packaging: A: 240 or 24kg/barrel, B: 19kg/barrel
Recommended storage conditions: Store in a dry and cool place.
Shelf life: 12 months for component A and 6 months for component B.